Toyota Prius 2008 Fuse Replacement

Having an electrical issue? It could be a blown fuse — an easy fix you can do yourself.

Follow the steps below to find and replace the fuse:

Step 1: Find the Fuse Box

In your Toyota Prius 2008, the interior fuse box is typically located under the dashboard on the driver's side. Some vehicles also have an additional fuse box in the engine compartment. Check your owner's manual or the fuse box cover for the exact location.

Step 2: Identify the Corresponding Fuse

Below is the complete fuse list for your vehicle. Find the circuit that isn't working and note the fuse number and amperage.

Passenger Compartment Fuse Box

Fuse #FunctionAmperage
1Spare
2M/HTR15
3WIP30
4RR WIP15
5WSH20
6ECU-IG7.5
7GAUGE10
8OBD7.5
9STOP7.5
10Spare
11DOOR25
12ACC-B25
13ECU-B15
14Spare
15AM17.5
16TAIL10
17PANEL7.5
18A/C (HTR)10
19FR DOOR20
20Spare
21Spare
22Spare
23PWR OUTLET15
24ACC7.5
25Spare
26Spare
27Spare
28Spare
29PWR OUTLET FR15
30IGN7.5
31Spare

Engine Compartment Fuse Box

Fuse #FunctionAmperage
1SPARE30
2SPARE15
3DRL7.5
4H-LP LO RH10
4H-LP LO RH15
5H-LP LO LH10
5H-LP LO LH15
6H-LP HI RH10
7H-LP HI LH10
8EFI15
9AM215
10HORN10
11HEV20
12P CON MAIN7.5
13P CON MTR30
13ABS-125
14ETCS10
15BATT FAN10
16HAZ10
17DOME15
18ABS MAIN315
19ABS MAIN210
20ABS MAIN110
21FR FOG15
22CHS W/P10
23AMP30
24PTC HTR230
25PTC HTR130
26CDS FAN30
27Spare
28Spare
29P/I60
30HEAD MAIN40
31Spare
32ABS-130
33ABS-230
34Spare
35DC/DC100
36Spare
37Spare
38PS HTR50
39RDI30
40HTR40
41ESP50
42Spare
RelaySpare
R1Spare
R2Spare
R3Spare
R4Spare
R5Spare
R6Spare
R7Spare
R8Spare
R9Spare

Step 3: Check the Fuse

Use the plastic fuse puller, typically found in the fuse box, to remove the fuse. Hold it up to a light source. If the metal filament inside is broken or charred, the fuse is bad and needs to be replaced.

Comparison of a good fuse and a blown fuse — the blown fuse has a broken filament

Step 4: How to Get a Replacement

You can buy a replacement fuse at any auto parts store. Make sure you match the **amperage (A)** and **physical size** of the fuse exactly. For example, if you need a 20A fuse, get a 20A fuse.

Step 5: Replace the Fuse

Gently press the new fuse into the empty slot. You should feel a slight click when it's securely in place. Test the affected circuit to confirm it's working again.

What Now?

Fuse Was Blown — What to Buy

Ask at any auto parts store (AutoZone, O'Reilly, Advance Auto) for a blade fuse with the same amperage printed on the old one (e.g., 10A, 15A, 20A). Also match the physical size — mini (most modern cars), standard, or maxi. Replacement fuses cost under $5 and most stores sell assorted packs.

Fuse Looks Fine — Other Causes

If the fuse is intact, the problem isn't a blown fuse. Common alternatives include a bad relay (a click-sized electrical switch), a faulty wiring connection, or a failed component (motor, switch, module). At this point, a mechanic's diagnostic is the most reliable next step.

Frequently Asked Questions

What happens if I put in the wrong amperage fuse?

Higher amperage fuses won't protect the circuit and can cause wiring damage or fire. Lower amperage fuses will blow again immediately. Always match the exact amperage.

Why does my fuse keep blowing?

A repeatedly blown fuse indicates an underlying short circuit or overload. Replacing it again won't fix the root cause — consult a mechanic.

Do I need any tools?

Most cars come with a plastic fuse puller in the fuse box lid. If not, fine-tip needle-nose pliers work. A small flashlight helps.

How do I know what size fuse to buy?

Match the amperage printed on the old fuse (e.g., 10A, 15A, 20A) and the physical blade size (mini, standard, maxi). Auto parts stores carry assorted packs.