Honda Odyssey 1998 Fuse Replacement

Having an electrical issue? It could be a blown fuse — an easy fix you can do yourself.

Follow the steps below to find and replace the fuse:

Step 1: Find the Fuse Box

In your Honda Odyssey 1998, the interior fuse box is typically located under the dashboard on the driver's side. Some vehicles also have an additional fuse box in the engine compartment. Check your owner's manual or the fuse box cover for the exact location.

Step 2: Identify the Corresponding Fuse

Below is the complete fuse list for your vehicle. Find the circuit that isn't working and note the fuse number and amperage.

Passenger Compartment Fuse Box Fuse Box

Fuse #FunctionAmperage
1Back-up Lights, Meter Lights (Turn Signal)10
2Fuel Pump15
3SRS10
4ECU (Cruise Control)7.5
5Window Relay, Sunroof, Rear Wiper10
6Front Wiper Relay, Front Washer10
7Power Mirror7.5
8Heater Control Relay, A/C Clutch Relay, Cooling Fan Relay7.5
9Starter Signal7.5
10Daytime Running (On Canadian models)7.5
11Radio7.5
sSpare Fuses

Engine Compartment Fuse Box Fuse Box

Fuse #FunctionAmperage
1Cooling Fan20
2Right Headlight15
3Left Headlight15
4Rear Defroster30
5Ignition Switch50
6Rear Right Power Window20
7Front Right Power Window20
8Sunroof30
9Condenser Fan20
10Back Up (Radio)7.5
11Rear Left Power Window20
12Front Left Power Window20
13ECU (Injector) (PCM)15
14Door Lock20
15Daytime Running Light (on Canadian models)10
16Dash lights, Exterior lights15
17Interior Light7.5
18Power Seat Height20
19Radio, Cigarette Lighter15
20Stop Light, Horn15
21Hazard10
22Heater Blower40
23Wiper40
24Battery100

Step 3: Check the Fuse

Use the plastic fuse puller, typically found in the fuse box, to remove the fuse. Hold it up to a light source. If the metal filament inside is broken or charred, the fuse is bad and needs to be replaced.

Comparison of a good fuse and a blown fuse — the blown fuse has a broken filament

Step 4: How to Get a Replacement

You can buy a replacement fuse at any auto parts store. Make sure you match the **amperage (A)** and **physical size** of the fuse exactly. For example, if you need a 20A fuse, get a 20A fuse.

Step 5: Replace the Fuse

Gently press the new fuse into the empty slot. You should feel a slight click when it's securely in place. Test the affected circuit to confirm it's working again.

What Now?

Fuse Was Blown — What to Buy

Ask at any auto parts store (AutoZone, O'Reilly, Advance Auto) for a blade fuse with the same amperage printed on the old one (e.g., 10A, 15A, 20A). Also match the physical size — mini (most modern cars), standard, or maxi. Replacement fuses cost under $5 and most stores sell assorted packs.

Fuse Looks Fine — Other Causes

If the fuse is intact, the problem isn't a blown fuse. Common alternatives include a bad relay (a click-sized electrical switch), a faulty wiring connection, or a failed component (motor, switch, module). At this point, a mechanic's diagnostic is the most reliable next step.

Frequently Asked Questions

What happens if I put in the wrong amperage fuse?

Higher amperage fuses won't protect the circuit and can cause wiring damage or fire. Lower amperage fuses will blow again immediately. Always match the exact amperage.

Why does my fuse keep blowing?

A repeatedly blown fuse indicates an underlying short circuit or overload. Replacing it again won't fix the root cause — consult a mechanic.

Do I need any tools?

Most cars come with a plastic fuse puller in the fuse box lid. If not, fine-tip needle-nose pliers work. A small flashlight helps.

How do I know what size fuse to buy?

Match the amperage printed on the old fuse (e.g., 10A, 15A, 20A) and the physical blade size (mini, standard, maxi). Auto parts stores carry assorted packs.