Honda Fit 2008 Fuse Replacement

Having an electrical issue? It could be a blown fuse — an easy fix you can do yourself.

Follow the steps below to find and replace the fuse:

Step 1: Find the Fuse Box

In your Honda Fit 2008, the interior fuse box is typically located under the dashboard on the driver's side. Some vehicles also have an additional fuse box in the engine compartment. Check your owner's manual or the fuse box cover for the exact location.

Step 2: Identify the Corresponding Fuse

Below is the complete fuse list for your vehicle. Find the circuit that isn't working and note the fuse number and amperage.

Passenger compartment Fuse Box

Fuse #FunctionAmperage
1Back Up Light10
2Not Used
3METER10
4Turn Light10
5Not Used
6Front Wipers30
7SRS10
8Daytime Running Light (Canadian models)
9Rear Defogger20
10HAC7.5
11Fuel Pump15
12Rear Wiper10
13SRS10
14IGP15
15Left Rear Power Window20
16Right Rear Power Window20
17Right Front Power Window20
18TPMS (If equipped)
18Daytime Running Light (Canadian models)
19Not Used
20Not Used
21Fog Light (If equipped)
22Small Light10
23LAF10
24Not Used
25ABS7.5
26Radio7.5
27ACC Socket15
28Power Door Lock (If equipped)
29Driver’s Power Window20
30Not Used
31LAF7.5
32DBW15
33Ignition Coil15

Engine compartment Fuse Box

Fuse #FunctionAmperage
1Battery80
2EPS60
3Ignition50
4ABS30
5Blower Relay40
6Power Window40
7(HAC Option)
8Back Up10
9Small Light30
10Cooling Fan30
11Condenser Fan, MG Clutch (If equipped)30
12Right Headlight20
13Left Headlight20
14Hazard10
15ABS F/S30
16Horn, Stop15

Step 3: Check the Fuse

Use the plastic fuse puller, typically found in the fuse box, to remove the fuse. Hold it up to a light source. If the metal filament inside is broken or charred, the fuse is bad and needs to be replaced.

Comparison of a good fuse and a blown fuse — the blown fuse has a broken filament

Step 4: How to Get a Replacement

You can buy a replacement fuse at any auto parts store. Make sure you match the **amperage (A)** and **physical size** of the fuse exactly. For example, if you need a 20A fuse, get a 20A fuse.

Step 5: Replace the Fuse

Gently press the new fuse into the empty slot. You should feel a slight click when it's securely in place. Test the affected circuit to confirm it's working again.

What Now?

Fuse Was Blown — What to Buy

Ask at any auto parts store (AutoZone, O'Reilly, Advance Auto) for a blade fuse with the same amperage printed on the old one (e.g., 10A, 15A, 20A). Also match the physical size — mini (most modern cars), standard, or maxi. Replacement fuses cost under $5 and most stores sell assorted packs.

Fuse Looks Fine — Other Causes

If the fuse is intact, the problem isn't a blown fuse. Common alternatives include a bad relay (a click-sized electrical switch), a faulty wiring connection, or a failed component (motor, switch, module). At this point, a mechanic's diagnostic is the most reliable next step.

Frequently Asked Questions

What happens if I put in the wrong amperage fuse?

Higher amperage fuses won't protect the circuit and can cause wiring damage or fire. Lower amperage fuses will blow again immediately. Always match the exact amperage.

Why does my fuse keep blowing?

A repeatedly blown fuse indicates an underlying short circuit or overload. Replacing it again won't fix the root cause — consult a mechanic.

Do I need any tools?

Most cars come with a plastic fuse puller in the fuse box lid. If not, fine-tip needle-nose pliers work. A small flashlight helps.

How do I know what size fuse to buy?

Match the amperage printed on the old fuse (e.g., 10A, 15A, 20A) and the physical blade size (mini, standard, maxi). Auto parts stores carry assorted packs.