Honda CR-V 2006 Fuse Replacement

Having an electrical issue? It could be a blown fuse — an easy fix you can do yourself.

Follow the steps below to find and replace the fuse:

Step 1: Find the Fuse Box

In your Honda CR-V 2006, the interior fuse box is typically located under the dashboard on the driver's side. Some vehicles also have an additional fuse box in the engine compartment. Check your owner's manual or the fuse box cover for the exact location.

Step 2: Identify the Corresponding Fuse

Below is the complete fuse list for your vehicle. Find the circuit that isn't working and note the fuse number and amperage.

Instrument panel Fuse Box

Fuse #FunctionAmperage
1Ignition Coil15
2Rear Accessory Power Socket10
3Daytime running lights (Canadian models)10
4ACG10
5Not Used
6Power Window Relay7.5
7Moonroof20
8Accessory, Radio7.5
9Rear Wiper7.5
10Meter7.5
11Not Used
12Daytime running lights (Canadian models)7.5
13SRS10
14Remote Control Mirrors10
15LAF Heater20
16Heated Seat20
17Fuel Pump15
18Front Accessory Power Socket15
19Turn Signal Lights7.5
20Front Wiper20
21Not Used
22Front Right Power Window20
23Front Left Power Window20
24Rear Left Power Window20
25Rear Right Power Window20

Engine compartment Fuse Box

Fuse #FunctionAmperage
1Condenser Fan20
2Small Light15
3Interior Light15
4Cooling Fan20
5Hazard15
6FI ECU15
7Horn, Stop15
8Not Used
9Back Up10
10ABS Motor30
11Rear Defroster20
12Heater Motor40
13Power Window40
14Option40
15Left Headlight15
16Door Lock20
17Right Headlight15
18ABS F/S30
19Battery100
20Ignition 150
21-25Spare Fuses7.5

Step 3: Check the Fuse

Use the plastic fuse puller, typically found in the fuse box, to remove the fuse. Hold it up to a light source. If the metal filament inside is broken or charred, the fuse is bad and needs to be replaced.

Comparison of a good fuse and a blown fuse — the blown fuse has a broken filament

Step 4: How to Get a Replacement

You can buy a replacement fuse at any auto parts store. Make sure you match the **amperage (A)** and **physical size** of the fuse exactly. For example, if you need a 20A fuse, get a 20A fuse.

Step 5: Replace the Fuse

Gently press the new fuse into the empty slot. You should feel a slight click when it's securely in place. Test the affected circuit to confirm it's working again.

What Now?

Fuse Was Blown — What to Buy

Ask at any auto parts store (AutoZone, O'Reilly, Advance Auto) for a blade fuse with the same amperage printed on the old one (e.g., 10A, 15A, 20A). Also match the physical size — mini (most modern cars), standard, or maxi. Replacement fuses cost under $5 and most stores sell assorted packs.

Fuse Looks Fine — Other Causes

If the fuse is intact, the problem isn't a blown fuse. Common alternatives include a bad relay (a click-sized electrical switch), a faulty wiring connection, or a failed component (motor, switch, module). At this point, a mechanic's diagnostic is the most reliable next step.

Frequently Asked Questions

What happens if I put in the wrong amperage fuse?

Higher amperage fuses won't protect the circuit and can cause wiring damage or fire. Lower amperage fuses will blow again immediately. Always match the exact amperage.

Why does my fuse keep blowing?

A repeatedly blown fuse indicates an underlying short circuit or overload. Replacing it again won't fix the root cause — consult a mechanic.

Do I need any tools?

Most cars come with a plastic fuse puller in the fuse box lid. If not, fine-tip needle-nose pliers work. A small flashlight helps.

How do I know what size fuse to buy?

Match the amperage printed on the old fuse (e.g., 10A, 15A, 20A) and the physical blade size (mini, standard, maxi). Auto parts stores carry assorted packs.