Honda Accord 2007 Fuse Replacement

Having an electrical issue? It could be a blown fuse — an easy fix you can do yourself.

Follow the steps below to find and replace the fuse:

Step 1: Find the Fuse Box

In your Honda Accord 2007, the interior fuse box is typically located under the dashboard on the driver's side. Some vehicles also have an additional fuse box in the engine compartment. Check your owner's manual or the fuse box cover for the exact location.

Step 2: Identify the Corresponding Fuse

Below is the complete fuse list for your vehicle. Find the circuit that isn't working and note the fuse number and amperage.

Passenger compartment Fuse Box

Fuse #FunctionAmperage
1Drive by Wire (6-cylinder models)
2Ignition Coil15
3Day Light (On Canadian models)
4Laf Heater15
5Radio10
6Interior Light7.5
7Back-Up Lights10
8Door Lock20
9Front Accessory Sockets15
10IG OPDS7.5
11IG Wiper30
12Not Used
13Passenger’s Power Seat Recline
14Driver’s Power Seat Slide
15Heated Seat
16Driver’s Power Seat Recline
17Passenger’s Power Seat Slide
18IGACG15
19IG Fuel Pump15
20IG Washer7.5
21IG Meter7.5
22IG SRS10
23IGP (PGM-FI ECU)7.5
24Left Rear Power Window20
25Right Rear Power Window20
26Right Front Power Window20
27Driver’s Power Window20
28Moonroof
29Not Used
30IG HAC7.5
31Not Used
32ACC7.5
33HAC OP7.5

Engine compartment Fuse Box

Fuse #FunctionAmperage
1Left Headlight Low10
2(Rear Defroster Coil)
3Left Headlight Hi10
4Small Light15
5Right Headlight Hi10
6Right Headlight Low10
7Back Up7.5
8FI ECU15
9Condenser fan20
10Not Used
11Cooling Fan20
11Cooling Fan (6-cylinder models)30
12MG. Clutch7.5
13Horn, Stop20
14Rear Defroster40
15Back Up, ACC40
16Hazard15
17ABS Motor30
17TCS Motor (6-cylinder models)30
18ABS F/S20
18TCS (6-cylinder models)40
19Heated Seats40
20Condenser Fan
21Heater Motor40
22Battery100
22Not Used
23+ B IG1 Main50
23Power Window Main50

Step 3: Check the Fuse

Use the plastic fuse puller, typically found in the fuse box, to remove the fuse. Hold it up to a light source. If the metal filament inside is broken or charred, the fuse is bad and needs to be replaced.

Comparison of a good fuse and a blown fuse — the blown fuse has a broken filament

Step 4: How to Get a Replacement

You can buy a replacement fuse at any auto parts store. Make sure you match the **amperage (A)** and **physical size** of the fuse exactly. For example, if you need a 20A fuse, get a 20A fuse.

Step 5: Replace the Fuse

Gently press the new fuse into the empty slot. You should feel a slight click when it's securely in place. Test the affected circuit to confirm it's working again.

What Now?

Fuse Was Blown — What to Buy

Ask at any auto parts store (AutoZone, O'Reilly, Advance Auto) for a blade fuse with the same amperage printed on the old one (e.g., 10A, 15A, 20A). Also match the physical size — mini (most modern cars), standard, or maxi. Replacement fuses cost under $5 and most stores sell assorted packs.

Fuse Looks Fine — Other Causes

If the fuse is intact, the problem isn't a blown fuse. Common alternatives include a bad relay (a click-sized electrical switch), a faulty wiring connection, or a failed component (motor, switch, module). At this point, a mechanic's diagnostic is the most reliable next step.

Frequently Asked Questions

What happens if I put in the wrong amperage fuse?

Higher amperage fuses won't protect the circuit and can cause wiring damage or fire. Lower amperage fuses will blow again immediately. Always match the exact amperage.

Why does my fuse keep blowing?

A repeatedly blown fuse indicates an underlying short circuit or overload. Replacing it again won't fix the root cause — consult a mechanic.

Do I need any tools?

Most cars come with a plastic fuse puller in the fuse box lid. If not, fine-tip needle-nose pliers work. A small flashlight helps.

How do I know what size fuse to buy?

Match the amperage printed on the old fuse (e.g., 10A, 15A, 20A) and the physical blade size (mini, standard, maxi). Auto parts stores carry assorted packs.