Ford Explorer 2018 Fuse Replacement

Having an electrical issue? It could be a blown fuse — an easy fix you can do yourself.

Follow the steps below to find and replace the fuse:

Step 1: Find the Fuse Box

In your Ford Explorer 2018, the interior fuse box is typically located under the dashboard on the driver's side. Some vehicles also have an additional fuse box in the engine compartment. Check your owner's manual or the fuse box cover for the exact location.

Step 2: Identify the Corresponding Fuse

Below is the complete fuse list for your vehicle. Find the circuit that isn't working and note the fuse number and amperage.

Fuse #FunctionAmperage
1Powertrain control module power.20
2Engine emissions (MIL).20
3A/C clutch control relay coil. Variable Air Conditioning Compressor. Active grille shutters.20
4Ignition coils.20
5Not used.
6Not used.
7Not used.
8Not used.
9Not used.
10Heated mirrors.15
112018: Right hand side electronic cooling fan 3 relay. 2019: Not used
12Heated rear window.40
13Not used.
14Powertrain control module relay.
15Horn relay power.20
16A/C clutch relay power.10
17Rear heated window and heated mirrors relay.
18Rear blower motor relay.
19Not used.
20Left hand side cooling fan relay.
21Cooling fans series/parallel relay.
22Electronic fan relay 2.25
23Not used.
242018: Not used. 2019: Right hand side electronic cooling fan 3 relay
25Not used.
26Anti-lock brake system valves.30
27Trailer tow battery charge relay power.30
28Not used.
29Starter relay.
30Not used.
31Electric power-assisted steering.10
32Anti-lock brake system module.10
33Powertrain control module (Ignition Switch Position - Run).10
34Blind spot information system. Adaptive cruise control. Front view camera. Rear camera.10
35Not used.
36Blower motor relay.
37Trailer tow battery charge relay.
38A/C compressor clutch relay.
39Horn relay.
40Not used.
41Rear blower motor.40
42Not used.
43Front blower motor.40
44Voltage quality module bus.50
45Electronic fan relay 1.40
46Trailer tow brake controller.30
47Not used.
48Body control module RP1 bus.50
49Not used.
50Body control module RP2 bus.50
51Electronic fan relay 3.50
52Anti-lock brake system pump.60
53Not used.
54Not used.
55Not used.
56Power inverter.40
57Not used.
58Not used.
59Not used.
60Power point (front console bin).20
61Not used.
62Power point (instrument panel).20
63Fuel pump.30
64Not used.
65Power point (2nd row) (without USB charger).20
66Not used.
67Power point (cargo area).20
68Not used.
69Power liftgate.30
70Trailer tow left-hand and right-hand stop and direction indicator lamps.15
71Not used.
72Heated/cooled seats.30
73Driver seat module. Driver seat power.30
74Passenger seat power.30
75Front wiper motor.30
76Not used.
77Not used.
783rd row power folding seat module relay.30
79Starter relay.30
80Not used.
81Trailer tow back-up lamp relay.10
822018: Not used. 2019: Steering column lock (if equipped).20
83Brake on/off switch.10
84Not used.
852nd row USB charger (if equipped).5
86Not used.
87Not used.
88Not used.
89Not used.
90Not used.
91Not used.
92Multi-contour seat module relay.15
93Alternator sense.10
94Rear washer relay.15
95Rear wiper relay.15
96Powertrain control module relay coil power.10
97Rain sensor.5
982nd row seat motors.20
99Trailer tow parking lamp relay.20

Step 3: Check the Fuse

Use the plastic fuse puller, typically found in the fuse box, to remove the fuse. Hold it up to a light source. If the metal filament inside is broken or charred, the fuse is bad and needs to be replaced.

Comparison of a good fuse and a blown fuse — the blown fuse has a broken filament

Step 4: How to Get a Replacement

You can buy a replacement fuse at any auto parts store. Make sure you match the **amperage (A)** and **physical size** of the fuse exactly. For example, if you need a 20A fuse, get a 20A fuse.

Step 5: Replace the Fuse

Gently press the new fuse into the empty slot. You should feel a slight click when it's securely in place. Test the affected circuit to confirm it's working again.

What Now?

Fuse Was Blown — What to Buy

Ask at any auto parts store (AutoZone, O'Reilly, Advance Auto) for a blade fuse with the same amperage printed on the old one (e.g., 10A, 15A, 20A). Also match the physical size — mini (most modern cars), standard, or maxi. Replacement fuses cost under $5 and most stores sell assorted packs.

Fuse Looks Fine — Other Causes

If the fuse is intact, the problem isn't a blown fuse. Common alternatives include a bad relay (a click-sized electrical switch), a faulty wiring connection, or a failed component (motor, switch, module). At this point, a mechanic's diagnostic is the most reliable next step.

Frequently Asked Questions

What happens if I put in the wrong amperage fuse?

Higher amperage fuses won't protect the circuit and can cause wiring damage or fire. Lower amperage fuses will blow again immediately. Always match the exact amperage.

Why does my fuse keep blowing?

A repeatedly blown fuse indicates an underlying short circuit or overload. Replacing it again won't fix the root cause — consult a mechanic.

Do I need any tools?

Most cars come with a plastic fuse puller in the fuse box lid. If not, fine-tip needle-nose pliers work. A small flashlight helps.

How do I know what size fuse to buy?

Match the amperage printed on the old fuse (e.g., 10A, 15A, 20A) and the physical blade size (mini, standard, maxi). Auto parts stores carry assorted packs.