Ford Escape 2007 Fuse Replacement
Having an electrical issue? It could be a blown fuse — an easy fix you can do yourself.
Follow the steps below to find and replace the fuse:
Step 1: Find the Fuse Box
In your Ford Escape 2007, the interior fuse box is typically located under the dashboard on the driver's side. Some vehicles also have an additional fuse box in the engine compartment. Check your owner's manual or the fuse box cover for the exact location.
Step 2: Identify the Corresponding Fuse
Below is the complete fuse list for your vehicle. Find the circuit that isn't working and note the fuse number and amperage.
Passenger compartment Fuse Box
| Fuse # | Function | Amperage |
|---|---|---|
| 1 | Trailer tow park lamps | 15 |
| 2 | Not used | |
| 3 | Front and rear park lamps | 15 |
| 4 | Ignition switch | 10 |
| 5 | Powertrain Control Module (PCM relay), Fuel pump relay, Main fan relay, High/Low speed fan relay 2, PATS module | 2 |
| 6 | Center High-Mounted Stop Lamp (CHMSL), Stop lamps, PCM, Anti-lock Brake System (ABS), Speed control, Brake On-Off switch | 15 |
| 7 | Instrument cluster, Diagnostic connector, Power mirror switch, Radio | 10 |
| 8 | Not used | |
| 9 | Power door locks, Power seats | 30 |
| 10 | Heated mirrors | 15 |
| 11 | Sunroof, Electrochromatic mirror | 15 |
| 12 | Radio | 5 |
| 13 | Not used | |
| 14 | Not used | |
| 15 | Power windows | 30 |
| 16 | Subwoofer | 15 |
| 17 | Low beams | 15 |
| 18 | 4WD | 10 |
| 19 | Not used | |
| 20 | Horn | 15 |
| 21 | Rear wiper motor, Rear wiper washer | 10 |
| 22 | Instrument cluster | 10 |
| 23 | Not used | |
| 24 | Cigar lighter | 20 |
| 25 | Front wiper motor, Front wiper washer | 20 |
| 26 | Climate control system mode switch | 5 |
| 27 | Canister vent, Speed control cancel switch | 5 |
| 28 | Instrument cluster | 10 |
| 29 | Reverse park aid | 10 |
| 30 | Not used | |
| 31 | Not used | |
| 32 | Brake-Transmission shift lock | 10 |
| 33 | Air bag module, Passenger Air bag Deactivation (PAD) indicator lamp, Occupant Classification Sensor (OCS) | 15 |
| 34 | ABS module, Evac and Fill, Speed control | 5 |
| 35 | Heated seats module, 4WD | 5 |
Power distribution box Fuse Box
| Fuse # | Function | Amperage |
|---|---|---|
| 1 | Not used | |
| 2 | Headlamp power | 25 |
| 3 | High beams, Turn signals, Interior lamps, Headlamp power | 25 |
| 4 | Keep Alive Power (KA PWR) | 5 |
| 5 | Heated Exhaust Gas Oxygen (HEGO) sensors | 15 |
| 6 | Fuel pump | 20 |
| 7 | RUN/ACC relay -Electrochromatic mirror, Cigar lighter, Front and rear wipers | 40 |
| 8 | Powertrain Control Module (PCM), Injectors and coil | 30 |
| 9 | Alternator | 15 |
| 10 | Heated seats | 30 |
| 11 | PCM | 10 |
| 12 | Power point | 20 |
| 13 | Fog lamps | 20 |
| 14 | A/C clutch, A/C relay | 15 |
| 15 | Anti-lock Brake System (ABS) solenoid | 30 |
| 16 | I/P fuse panel (RUN/START) | 25 |
| 17 | Ignition (main) | 50 |
| 18 | Blower motor | 40 |
| 19 | Accessory delay relay - Subwoofer and 4WD, Low beam | 40 |
| 20 | ABS | 60 |
| 21 | Horn, CHMSL, Cluster, Power locks and power seats | 40 |
| 22 | Cooling fan | 40 |
| 23 | Rear defroster, Park lamps relay | 40 |
| 24 | High/Low speed fan | 40 |
| 25 | Shunt | |
| R2 | PCM relay | |
| R3 | Fuel pump relay | |
| R4 | Cooling fan relay | |
| R5 | High/Low speed fan relay 1 | |
| R6 | Blower motor relay | |
| R7 | Starter relay | |
| R8 | High/Low speed fan relay 2 | |
| R9 | Fog lamps relay | |
| R10 | A/C relay | |
| D1 | Not used | |
| D2 | A/C diode |
Step 3: Check the Fuse
Use the plastic fuse puller, typically found in the fuse box, to remove the fuse. Hold it up to a light source. If the metal filament inside is broken or charred, the fuse is bad and needs to be replaced.
Step 4: How to Get a Replacement
You can buy a replacement fuse at any auto parts store. Make sure you match the **amperage (A)** and **physical size** of the fuse exactly. For example, if you need a 20A fuse, get a 20A fuse.
Step 5: Replace the Fuse
Gently press the new fuse into the empty slot. You should feel a slight click when it's securely in place. Test the affected circuit to confirm it's working again.
What Now?
Fuse Was Blown — What to Buy
Ask at any auto parts store (AutoZone, O'Reilly, Advance Auto) for a blade fuse with the same amperage printed on the old one (e.g., 10A, 15A, 20A). Also match the physical size — mini (most modern cars), standard, or maxi. Replacement fuses cost under $5 and most stores sell assorted packs.
Fuse Looks Fine — Other Causes
If the fuse is intact, the problem isn't a blown fuse. Common alternatives include a bad relay (a click-sized electrical switch), a faulty wiring connection, or a failed component (motor, switch, module). At this point, a mechanic's diagnostic is the most reliable next step.
Frequently Asked Questions
What happens if I put in the wrong amperage fuse?
Higher amperage fuses won't protect the circuit and can cause wiring damage or fire. Lower amperage fuses will blow again immediately. Always match the exact amperage.
Why does my fuse keep blowing?
A repeatedly blown fuse indicates an underlying short circuit or overload. Replacing it again won't fix the root cause — consult a mechanic.
Do I need any tools?
Most cars come with a plastic fuse puller in the fuse box lid. If not, fine-tip needle-nose pliers work. A small flashlight helps.
How do I know what size fuse to buy?
Match the amperage printed on the old fuse (e.g., 10A, 15A, 20A) and the physical blade size (mini, standard, maxi). Auto parts stores carry assorted packs.