Chevrolet Trailblazer 2002 Fuse Replacement

Having an electrical issue? It could be a blown fuse — an easy fix you can do yourself.

Follow the steps below to find and replace the fuse:

Step 1: Find the Fuse Box

In your Chevrolet Trailblazer 2002, the interior fuse box is typically located under the dashboard on the driver's side. Some vehicles also have an additional fuse box in the engine compartment. Check your owner's manual or the fuse box cover for the exact location.

Step 2: Identify the Corresponding Fuse

Below is the complete fuse list for your vehicle. Find the circuit that isn't working and note the fuse number and amperage.

Fuse #FunctionAmperage
1Passenger Door Control Module
2Driver Door Control Module
3Liftgate Module 2
4Truck Body Controller 3
5Rear Fog Lamps
6Spare2002
7Truck Body Controller 2
8Power Seats
9Spare2002
10Driver Door Module
11Amplifer
12Passenger Door Module
13Rear Climate Controls
14Driver Side Rear Parking Lamps
15Spare2002
16Vehicle Center High-Mounted Stoplamp (CHMSL)
17Passenger Side Rear Parking Lamps
18Locks
19Spare2002
20Spare2002
21Lock
23Blank
24Unlock
25Blank
26Blank
27OnStar Overhead Battery, OnStar System
28Spare2002
29Not Used
30Parking Lamps
31Truck Body Controller Accessory
32Truck Body Controller 5
33Front Wipers
34Vehicle Stop
35Spare2002
36Heat Ventilation Air Conditioning B
37Front Parking Lamps
38Driver Side Turn Signal
39Heat Ventilation Air Conditioning 1
40Truck Body Controller 4
41Radio
42Trailer Park
43Passenger Side Turn Signal
44Heat Ventilation Air Conditioning
45Rear Fog Lamps
46Auxiliary Power 1
47Ignition 0
48Four-Wheel Drive
49Blank
50Truck Body Controller Ignition
51Brakes
52Truck Body Controller Run

Step 3: Check the Fuse

Use the plastic fuse puller, typically found in the fuse box, to remove the fuse. Hold it up to a light source. If the metal filament inside is broken or charred, the fuse is bad and needs to be replaced.

Comparison of a good fuse and a blown fuse — the blown fuse has a broken filament

Step 4: How to Get a Replacement

You can buy a replacement fuse at any auto parts store. Make sure you match the **amperage (A)** and **physical size** of the fuse exactly. For example, if you need a 20A fuse, get a 20A fuse.

Step 5: Replace the Fuse

Gently press the new fuse into the empty slot. You should feel a slight click when it's securely in place. Test the affected circuit to confirm it's working again.

What Now?

Fuse Was Blown — What to Buy

Ask at any auto parts store (AutoZone, O'Reilly, Advance Auto) for a blade fuse with the same amperage printed on the old one (e.g., 10A, 15A, 20A). Also match the physical size — mini (most modern cars), standard, or maxi. Replacement fuses cost under $5 and most stores sell assorted packs.

Fuse Looks Fine — Other Causes

If the fuse is intact, the problem isn't a blown fuse. Common alternatives include a bad relay (a click-sized electrical switch), a faulty wiring connection, or a failed component (motor, switch, module). At this point, a mechanic's diagnostic is the most reliable next step.

Frequently Asked Questions

What happens if I put in the wrong amperage fuse?

Higher amperage fuses won't protect the circuit and can cause wiring damage or fire. Lower amperage fuses will blow again immediately. Always match the exact amperage.

Why does my fuse keep blowing?

A repeatedly blown fuse indicates an underlying short circuit or overload. Replacing it again won't fix the root cause — consult a mechanic.

Do I need any tools?

Most cars come with a plastic fuse puller in the fuse box lid. If not, fine-tip needle-nose pliers work. A small flashlight helps.

How do I know what size fuse to buy?

Match the amperage printed on the old fuse (e.g., 10A, 15A, 20A) and the physical blade size (mini, standard, maxi). Auto parts stores carry assorted packs.